Do not turn the silver knob of the bidet unless you are sitting on, and using the toilet. The water can spray out of the bowl if your tushie isn't seated on it at the time.
To clean the bidet nozzle, turn the control arm to the left towards the “Nozzle Cleaning” position and water will wash over the nozzle.
For the general bidet wash function, turn the control knob to the right towards the “Wash” position.
• The further the knob is turned, the higher the water pressure will be.
• To lower the water pressure, turn the knob back towards the center.
• To stop the flow of water, rotate the knob to center so it sits flat.
Cleaning the SimpleSpa
To clean the nozzle, open the Nozzle Guard door by pulling it gently open on the right side. With the nozzle revealed, pull down on the nozzle cap, and
clean the spray holes and nozzle using a toothbrush or soft cloth and mild detergent (such as dish soap).
When cleaning, be careful not to drop or flush the nozzle cap. Periodically tighten the cap so it doesn’t become loose with use and cleaning.
To clean the SimpleSpa, use a mild cleaner such as Simple Green or Windex spray. Do not scrub or use harsh, abrasive products to clean the SimpleSpa, as they may scratch the product.
